AK85C Automatic Foot Lifter Device For DDL JUKI 7000A

author: Lily Shen

2024-06-21

JUKI DDL-7000A is a widely used industrial sewing machine. The included AK85C Automatic Foot Lifter Device is a spare part designed to improve the sewing efficiency and precision of JUKI DDL-7000A. Its main function is to automatically raise and lower the presser foot lifter, which is convenient for changing fabrics or adjusting sewing positions. Compared with manual presser foot lifter, the automatic presser foot lifter device greatly saves operation time and improves work efficiency.

When using AK85C Automatic Foot Lifter Device （For DDL JUKI 7000A）, users can easily achieve automatic lifting and lowering of the presser foot by operating the machine's control panel or foot pedal. Specifically, the AK85C automatic presser foot lifting device uses a sophisticated mechanical structure and sensor to automatically lift the presser foot when needed, so that when use JUKI sewing machine fabrics can be easily inserted or removed, or different sewing positions can be adjusted. After completing these operations, the device automatically lowers the presser foot and continues sewing.

(Spare part:AK85C Automatic Foot Lifter Device For DDL JUKI 7000A)

It is also very simple to install the AK85C Automatic Foot Lifter Device For DDL JUKI 7000A.

【Installation】
1.Remove the rear cover of the machine;
2.Replace the connecting hinges screw with the silver screw as shown in the figure;
3.Remove nut,washer;
4.Install the attached rear cover on the machine,and ensure that the siot of link arm is locked on the special screw;
5.Tighen the solenoid body on the rear cover plate with washers and nuts;
6.Push the solenoid shaft in the arrow mark direction;
7.Turn the connecting shaft in the most counter clockwise direction.Mark sure the movement of the whole mechanism is very smooth before tightening the clamping screw;
8.Plug the wire of the foot lifter into the control box of the motor.Re-check that he wire is not obstructing any moving parts;
9.In some type of motor,be sure to properly set the Dip-Switch in the control box before using the auto foot lifter.

Show you the installation and operation.

In addition, the AK85C Automatic Foot Lifter Device （For DDL JUKI 7000A）has high durability and reliability. It uses high-quality materials and Taiwan's original manufacturing technology to ensure stability and reliability under long-term use. At the same time, its maintenance is relatively simple and easy to clean and maintain.

It should be noted that when usingthe AK85C Automatic Foot Lifter Device （For DDL JUKI 7000A）, the operator needs to follow the prescribed operating procedures and perform regular maintenance and inspection to ensure its normal operation and extend its service life.

In summary, the AK85C Automatic Foot Lifter Device （For DDL JUKI 7000A） is a powerful, convenient, durable and reliable industrial sewing machine accessory that can greatly improve the efficiency and quality of sewing work.

【Product Link】